Los Angeles home with a newly replaced roof at sunset

Cost & PlanningUpdated November 2026 · By the RH Roofing team

How Much Does a New Roof Cost in Los Angeles?

The short answer

In the Los Angeles area, a new asphalt shingle roof typically runs about $8.50 per square foot of roof, so a 2,000-square-foot roof lands near $17,000. Flat roofing runs roughly $9 to $12 per square foot, standing-seam metal $12 to $24.50, and tile $17 to $25. Size, pitch, material and what is under the old roof decide where you fall.

What Does a New Roof Cost Per Square Foot in Los Angeles?

These are the rough ranges we use for Los Angeles-area homes. They cover tear-off, materials and installation, and they are a starting point, not a quote.

Roofing materialTypical cost per sq ft2,000 sq ft roof
Asphalt shinglesAbout $8.50 in LA ($4.00⁠–⁠$8.50 nationally)About $17,000
Flat roofing (TPO, PVC, torch-down)$9.00⁠–⁠$12.00$18,000⁠–⁠$24,000
Standing-seam metal$12.00⁠–⁠$24.50$24,000⁠–⁠$49,000
Clay or concrete tile$17.00⁠–⁠$25.00$34,000⁠–⁠$50,000

Ballpark figures for planning. Your price depends on the factors below and can only be confirmed with an on-site measure.

Why Is My Roof Bigger Than My House?

Roofers price by the square foot of roof, not floor. A roof is larger than the footprint beneath it because of its slope and its overhangs. A shallow roof adds around 7 percent to the footprint, a medium pitch about 15 percent, and a steep one 30 percent or more. Our Instant Roof Quote measures your roof from satellite imagery and does this math for you.

What Makes a Roof Cost More or Less?

  • Size and pitch. More area means more material, and steep roofs take longer and need more safety equipment.
  • Material. The biggest single choice. Tile can cost two to three times what shingles do.
  • Tear-off. Two layers of old roofing cost more to remove and dispose of than one.
  • Decking repairs. Rotted or soft plywood has to be replaced, and nobody can see it until the old roof is off.
  • Complexity. Hips, valleys, dormers, skylights and chimneys all add flashing and labor.
  • Access. Hillside lots and tight streets slow down delivery and cleanup.
  • Permits and code. Your city may require a permit, cool-roof rated materials or a fire-rated assembly.
Roof stripped down to the plywood decking during a replacement
Nobody knows the condition of the decking until the old roof comes off. A good estimate tells you up front what happens if some of it is bad.

Is the Cheapest Roofing Bid the Best One?

Usually not, and not always the most expensive one either. Compare what each bid actually includes: tear-off or layover, the underlayment, new flashing or reused, the permit, and the price per sheet for any decking that needs replacing. A low number that leaves those out is not really low. Our guide to choosing a roofing contractor has the full checklist.

How Do I Get an Exact Price for My Roof?

Start with the Instant Roof Quote for a ballpark in about a minute. Then have us out for a free roof inspection. We measure the roof, check the decking and flashing, and give you a written, itemized price.

Key Takeaways

  • Asphalt shingles run about $8.50 per square foot of roof in the LA area; tile and metal cost two to three times that.
  • Roofs are priced by roof area, which is larger than your floor area.
  • Decking repairs, extra layers and complex rooflines are the usual reasons a price rises.
  • Compare what bids include, not just the bottom line.

Questions

At about $8.50 per square foot, an asphalt shingle roof of that size is around $12,750. Remember that a 1,500 square foot house usually has a larger roof than that.

It makes a home easier to sell and removes one of the most common objections in escrow. Whether it returns its full cost in the sale price depends on the market and the condition of the old roof.

Questions About Your Own Roof? Ask Us.

Reading only gets you so far. We will look at your actual roof and give you a straight, written answer.

Get a Free Estimate

Or call or text747-230-4726

Call NowFree Estimate