A roofing estimate is easier to judge when you know the words in it. The ones that matter most: the decking is the wood your roof sits on, the underlayment is the waterproof layer over it, flashing seals the joints, and a square is 100 square feet of roof.
What Are the Parts of a Roof Called?
- Decking (sheathing). The plywood or boards nailed to the rafters. Everything else attaches to it.
- Underlayment. The water-resistant sheet between the decking and the roofing.
- Flashing. Metal that seals joints at walls, chimneys, valleys and pipes.
- Drip edge. Metal along the roof edges that keeps water off the fascia.
- Ridge. The peak where two slopes meet. Ridge caps cover it.
- Hip. An outside corner where two slopes meet and run down to the eave.
- Valley. An inside corner where two slopes meet and water collects.
- Eave. The lower edge of the roof that overhangs the wall.
- Rake. The sloped edge at a gable end.
- Fascia. The board along the eave that the gutters attach to.
- Soffit. The underside of the eave.
- Pipe boot (jack). The collar that seals around a vent pipe.
- Parapet. The low wall around the edge of many flat roofs.
- Scupper. An opening in a parapet that lets water drain off a flat roof.
What Do the Measurements Mean?
- Square. 100 square feet of roof. A 2,000 square foot roof is 20 squares.
- Pitch (slope). How steep the roof is, written as rise over run. A 4/12 roof rises 4 inches for every 12 inches across.
- Low slope. Generally under 2/12 to 3/12, where shingles do not belong and a membrane is needed.
What Do Roofers Mean by These Job Terms?
- Tear-off. Removing the old roofing down to the decking.
- Layover (overlay). New roofing installed over old. Rarely a good idea.
- Dry-in. The stage where underlayment makes the roof watertight.
- Lift and relay. Removing tile, replacing the underlayment, and putting the tile back.
- Re-roof. Replacing the roofing on an existing house.
What Do the Ratings Mean?
- Class A. The highest fire rating for a roof covering.
- Cool roof. A roof rated to reflect more sunlight and release heat.
- Wind rating. The wind speed a shingle is tested to withstand.
Key Takeaways
- Decking, underlayment and flashing do more to keep water out than the visible roofing.
- A square is 100 square feet of roof.
- Pitch decides which materials can be used.
- Class A is the top fire rating.





