Roofers working on a residential roof seen from above

MaintenanceUpdated November 2026 · By the RH Roofing team

Roofing Terms Glossary: A Plain-English Guide

The short answer

A roofing estimate is easier to judge when you know the words in it. The ones that matter most: the decking is the wood your roof sits on, the underlayment is the waterproof layer over it, flashing seals the joints, and a square is 100 square feet of roof.

What Are the Parts of a Roof Called?

  • Decking (sheathing). The plywood or boards nailed to the rafters. Everything else attaches to it.
  • Underlayment. The water-resistant sheet between the decking and the roofing.
  • Flashing. Metal that seals joints at walls, chimneys, valleys and pipes.
  • Drip edge. Metal along the roof edges that keeps water off the fascia.
  • Ridge. The peak where two slopes meet. Ridge caps cover it.
  • Hip. An outside corner where two slopes meet and run down to the eave.
  • Valley. An inside corner where two slopes meet and water collects.
  • Eave. The lower edge of the roof that overhangs the wall.
  • Rake. The sloped edge at a gable end.
  • Fascia. The board along the eave that the gutters attach to.
  • Soffit. The underside of the eave.
  • Pipe boot (jack). The collar that seals around a vent pipe.
  • Parapet. The low wall around the edge of many flat roofs.
  • Scupper. An opening in a parapet that lets water drain off a flat roof.

What Do the Measurements Mean?

  • Square. 100 square feet of roof. A 2,000 square foot roof is 20 squares.
  • Pitch (slope). How steep the roof is, written as rise over run. A 4/12 roof rises 4 inches for every 12 inches across.
  • Low slope. Generally under 2/12 to 3/12, where shingles do not belong and a membrane is needed.

What Do Roofers Mean by These Job Terms?

  • Tear-off. Removing the old roofing down to the decking.
  • Layover (overlay). New roofing installed over old. Rarely a good idea.
  • Dry-in. The stage where underlayment makes the roof watertight.
  • Lift and relay. Removing tile, replacing the underlayment, and putting the tile back.
  • Re-roof. Replacing the roofing on an existing house.

What Do the Ratings Mean?

  • Class A. The highest fire rating for a roof covering.
  • Cool roof. A roof rated to reflect more sunlight and release heat.
  • Wind rating. The wind speed a shingle is tested to withstand.

Key Takeaways

  • Decking, underlayment and flashing do more to keep water out than the visible roofing.
  • A square is 100 square feet of roof.
  • Pitch decides which materials can be used.
  • Class A is the top fire rating.

Questions About Your Own Roof? Ask Us.

Reading only gets you so far. We will look at your actual roof and give you a straight, written answer.

Get a Free Estimate

Or call or text747-230-4726

Call NowFree Estimate