Tile roof underlayment typically lasts 20 to 30 years in Southern California, far less than the tile above it. When it wears out the roof leaks even though the tile looks fine. The fix is a lift and relay: the tile is removed, new underlayment and flashing are installed, and the original tile is put back.
Why Does a Tile Roof Leak When the Tiles Look Fine?
Because tile is not waterproof on its own. It sheds most of the rain and shields what is beneath it from the sun, but wind-driven water still gets under it. The underlayment, a waterproof sheet over the wood decking, is what actually keeps water out of the house. Years of heat make it brittle until it cracks.
How Do I Know the Underlayment Is Failing?
- Leaks or ceiling stains with no broken tile above them
- Bits of black, crumbly material in the gutters
- A tile roof more than 20 to 25 years old that has never had the underlayment replaced
- Leaks that show up mostly in heavy or wind-driven rain
What Is a Lift and Relay?
- The tiles are carefully removed and stacked.
- The old underlayment and battens are stripped to the decking.
- Damaged decking is repaired.
- New underlayment and new flashing are installed.
- The original tiles go back on, with matching replacements for any that are broken.

Is It Cheaper Than a New Tile Roof?
Considerably, because the most expensive part of a tile roof, the tile, is reused. You pay for labor, underlayment, flashing and a modest number of replacement tiles.
Can Just One Section Be Done?
Yes. If one slope or one valley is leaking and the rest is holding, a partial lift and relay is a legitimate repair. If the whole roof is the same age, though, the rest will follow before long.
Key Takeaways
- Tile lasts 50 years or more; its underlayment lasts 20 to 30.
- A leaking tile roof usually needs underlayment, not tile.
- A lift and relay reuses your original tile.
- It costs far less than a new tile roof.






