Roofer inspecting a roof vent for leaks

Leaks & RepairsUpdated November 2026 · By the RH Roofing team

Why Is My Roof Leaking? 8 Common Causes

The short answer

Most roof leaks start at a joint, not in the open field of the roof. The usual causes are failed flashing, cracked pipe boots, worn underlayment under tile, damaged or missing shingles, clogged valleys and gutters, and ponding water on flat roofs.

What Are the Most Common Causes of Roof Leaks?

  1. Failed flashing. The metal at chimneys, walls and skylights. Sealant dries and cracks in the sun. See what roof flashing is.
  2. Cracked pipe boots. The rubber collars around plumbing vents often fail in 10 to 15 years.
  3. Worn tile underlayment. On tile roofs, the waterproofing layer beneath the tile wears out long before the tile does.
  4. Missing or damaged shingles. Wind lifts them; age makes them brittle.
  5. Clogged valleys and gutters. Debris dams the water and sends it sideways under the roofing.
  6. Ponding on flat roofs. Water that sits for days finds every seam.
  7. Skylights. Either the flashing around them or the seal of the unit itself.
  8. Damage from other trades. Satellite dishes, solar mounts and broken tiles from people walking the roof.
Clay barrel tiles on a roof
On a tile roof, the tile is rarely the problem. The underlayment beneath it is what keeps water out.

Why Does My Roof Only Leak in Heavy Rain?

Because a marginal detail only fails when it is overwhelmed. Heavy or wind-driven rain pushes water up under laps and into gaps that a light shower never reaches. It still needs fixing; it will get worse.

Why Is There a Stain but No Drip?

Small amounts of water soak into insulation and drywall and evaporate before they drip. A growing stain means it is happening repeatedly. It can also be condensation from poor attic ventilation, or a plumbing leak, which is worth ruling out.

How Does a Roofer Find the Source?

By working uphill from the stain. We check the attic for water trails, then inspect every penetration and joint above that point on the roof. Sometimes we run a hose test, wetting one section at a time. Guessing leads to patches that do not hold.

Key Takeaways

  • Leaks usually start at flashing, vents and other joints.
  • Tile roofs leak when the underlayment fails, not the tile.
  • A leak that only shows in heavy rain is still a leak.
  • Finding the true source matters more than patching the stain.

Questions About Your Own Roof? Ask Us.

Reading only gets you so far. We will look at your actual roof and give you a straight, written answer.

Get a Free Estimate

Or call or text747-230-4726

Call NowFree Estimate